<font size="1" color="#FF0000">LAST EDITED ON 18-Dec-01 AT 09:52PM (EDT)</font>
<font size="1" color="#FF0000">LAST EDITED ON 18-Dec-01 AT 09:52Â PM (EDT)</font>
http://quicksitebuilder.cnet.com/jcattera//sitebuildercontent/sitebuilderpictures/tva8.jpg
James Catterall's " Time Vortex Activator"
Here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct! The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply! ---James Catterall 50651 Walpole St. New Baltimore, MI 48047 Email: <[email protected]>
http://quicksitebuilder.cnet.com/jcattera/backup.html
There is only one problem with the device. The device will not launch into the year 2012 or 2013. I'm not sure exactly why, but when activated to that year the device is sent back to the "present time" on each attempt. There shouldn't be any difficulty traveling beyond the year 2013 or before 2012. Try to avoid traveling within the years 2010 and 2015. There appears to be much distruption in the Earth's magnetic field between this time range.
Have you ever been interested in the future or the past? I think we've all had an interest at some point in our lives to travel through time to encounter past events and experiences that we've only been able to read in books and pictures.
Well, here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct!
Just think of the idea of viewing, in person, your mother and father when they were kids? Or, to visit a long lost relative that you never met because you were to young or never even born yet? Or, even travel into the future to meet your children when they are older than you. Well, here's your chance!
If you order the "Time Vortex Activator Plans and Instructions" you'll have a detailed list of materials that you'll need to acquire. If you order the "Time Vortex Activator Kit" you'll have every thing you'll need to build your very own time machine.
How does this device operate?
The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply!
So, what is a Time Vortex?
It is a loophole that has the capabilitily to carry an object into the future or past, and as far as we know, these loopholes had always existed on Earth as one of Earth's unknown mysteries. Maybe they were left by the aliens to transport themselves to Earth from distant galaxies? No one knows. "Time Vortexs" are not easy to find. They are invisible entities that exist and are naked to the human eye. It is believed that some forms of life on Earth can see them, for example: insects, bats, etc., They have a greater sense for detecting obects around them.
Do "Time Vortex's have any relation to "Crop Circles"?
Recently, "Crop Circles" were proposed to be hoaxes, but the majority of "Crop Circles" are still unexpIained. Many are still forming with no evidence of anyone creating them. There is a strong similarity of the shape of the circles in the corn and wheat fields that are laid down, and the circular shape that the "Time Vortex" consumes. Knowing that "Time Vortex's" appear for short periods of time and relocate in other locations could explain some of the many mysteries behind "Crop Circles".
How do I launch myself into time?
When a "Time Vortex" is located and the Vortex Activator device is positioned over it, the operator must sit inside the triangular structure with both legs crossed "Indian style". The designated time is entered into the "Time Selector Device" ie. (day/month/year). When the operator is ready, the device will activate when the operator pushes the "red" button located on the "Time Selector Device". The triangular frame and operator will dissappear in the current time and reappear into the destinated time. The Vortex Activator will travel along with the operator in order to get back to the "present time".
Are the materials and dimensional tolerances important for the device to operate properly?
The materials and dimensional tolerances needed to construct this device are very crucial in allowing the device to operate properly. It is very important that the materials are precision cut within the correct dimensional tolerances. If not, the device will not operate. The "Time Vortex Activator Kit" comes with these precise pre-cut parts. Although, the "Time Vortex Activator Plans and Instructions" are very easy to follow, a person may find it very difficult to obtain the correct materials, ie. wire gage type, length of cut, proper alignment of parts, etc. to allow the device to operate properly. Unless the person is highly skilled in making fine cuts, soldering, and has a good knowledge of materials, I would highly suggest in ordering the "Time Vortex Activator Kit".
When the device is fully assembled, it is the operator's task to locate a "Time Vortex". "Time Vortex's" are not hard to locate if the operator has the tools and knowledge to find them. Your order will explain how to locate them in a lot greater detail, included in both Items #1 and #2.
<hr size="1" width="80%" color="#000099" align="left">"Everything you know,...is Wrong!
soon we shall all discover the truth."
http://profiles.yahoo.com/vosstech
<font size="1" color="#FF0000">LAST EDITED ON 18-Dec-01 AT 09:52Â PM (EDT)</font>
http://quicksitebuilder.cnet.com/jcattera//sitebuildercontent/sitebuilderpictures/tva8.jpg
James Catterall's " Time Vortex Activator"
Here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct! The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply! ---James Catterall 50651 Walpole St. New Baltimore, MI 48047 Email: <[email protected]>
http://quicksitebuilder.cnet.com/jcattera/backup.html
There is only one problem with the device. The device will not launch into the year 2012 or 2013. I'm not sure exactly why, but when activated to that year the device is sent back to the "present time" on each attempt. There shouldn't be any difficulty traveling beyond the year 2013 or before 2012. Try to avoid traveling within the years 2010 and 2015. There appears to be much distruption in the Earth's magnetic field between this time range.
Have you ever been interested in the future or the past? I think we've all had an interest at some point in our lives to travel through time to encounter past events and experiences that we've only been able to read in books and pictures.
Well, here's your chance to build a time machine that really works! Don't get fooled by the "flux capacitor" gimmick from "Back to the Future" - there is no just thing! To go through time it takes the special materials and instructions that you'll only find in my kit. My Time Travel design is based upon the "Tesla" and "Time Vortex" theories, and my device has proven these theories correct!
Just think of the idea of viewing, in person, your mother and father when they were kids? Or, to visit a long lost relative that you never met because you were to young or never even born yet? Or, even travel into the future to meet your children when they are older than you. Well, here's your chance!
If you order the "Time Vortex Activator Plans and Instructions" you'll have a detailed list of materials that you'll need to acquire. If you order the "Time Vortex Activator Kit" you'll have every thing you'll need to build your very own time machine.
How does this device operate?
The device operates on two natural power sources. The first natural power source is created by Earth's Magnetic field at the North and South Poles. The coils surrounding the device induce(draw) the low voltage power needed to operate the device. The second natural power source is created by a "Time Vortex" which supplies appropriate power and the gateway to launch the device into time. Traveling through the future or the past will be the operator's choice with the use of the time selector(shown in the above drawing). The time selector communicates the time destination to the activator coils via telemetry. The activator coils, in turn, communicate the information to the "Time Vortex". Simply, there is no need for a separate power supply!
So, what is a Time Vortex?
It is a loophole that has the capabilitily to carry an object into the future or past, and as far as we know, these loopholes had always existed on Earth as one of Earth's unknown mysteries. Maybe they were left by the aliens to transport themselves to Earth from distant galaxies? No one knows. "Time Vortexs" are not easy to find. They are invisible entities that exist and are naked to the human eye. It is believed that some forms of life on Earth can see them, for example: insects, bats, etc., They have a greater sense for detecting obects around them.
Do "Time Vortex's have any relation to "Crop Circles"?
Recently, "Crop Circles" were proposed to be hoaxes, but the majority of "Crop Circles" are still unexpIained. Many are still forming with no evidence of anyone creating them. There is a strong similarity of the shape of the circles in the corn and wheat fields that are laid down, and the circular shape that the "Time Vortex" consumes. Knowing that "Time Vortex's" appear for short periods of time and relocate in other locations could explain some of the many mysteries behind "Crop Circles".
How do I launch myself into time?
When a "Time Vortex" is located and the Vortex Activator device is positioned over it, the operator must sit inside the triangular structure with both legs crossed "Indian style". The designated time is entered into the "Time Selector Device" ie. (day/month/year). When the operator is ready, the device will activate when the operator pushes the "red" button located on the "Time Selector Device". The triangular frame and operator will dissappear in the current time and reappear into the destinated time. The Vortex Activator will travel along with the operator in order to get back to the "present time".
Are the materials and dimensional tolerances important for the device to operate properly?
The materials and dimensional tolerances needed to construct this device are very crucial in allowing the device to operate properly. It is very important that the materials are precision cut within the correct dimensional tolerances. If not, the device will not operate. The "Time Vortex Activator Kit" comes with these precise pre-cut parts. Although, the "Time Vortex Activator Plans and Instructions" are very easy to follow, a person may find it very difficult to obtain the correct materials, ie. wire gage type, length of cut, proper alignment of parts, etc. to allow the device to operate properly. Unless the person is highly skilled in making fine cuts, soldering, and has a good knowledge of materials, I would highly suggest in ordering the "Time Vortex Activator Kit".
When the device is fully assembled, it is the operator's task to locate a "Time Vortex". "Time Vortex's" are not hard to locate if the operator has the tools and knowledge to find them. Your order will explain how to locate them in a lot greater detail, included in both Items #1 and #2.
<hr size="1" width="80%" color="#000099" align="left">"Everything you know,...is Wrong!
soon we shall all discover the truth."
http://profiles.yahoo.com/vosstech