KerrTexas
Super Moderator
Yes, we were able to finally construct a working model of the liquid metal/plastic space/temporal vehicle. After many hours of instensive research and collaboration with the local librarian, we were able to make sense of all the design notes written on a variety of paper.
Hopefully, no problems will arise later, since some of the cocktail napkins had accidently been soaked in some spilled spirits. This caused us to lose some of the required mathematical calculations due to the ink being diluted and becoming illegible.
Also we did lose one "page" when Steve thought he saw some governmemt agents and ate the napkin. Turned out the suspected government agents were Jehovahs Witnesses. We are not certain, but perhaps the Jehovahs Witnesses and The Men in Black are one and the Same. Think about it, riding our neighborhoods on bikes ( vehicles with no traceable heat sources / license plates, etc..), going door to door and attempting to gain entry into as many homes as possible. Hmmmmm...
Anyway, after carefuly putting together the components we realized our goal of building a temporal craft. It isnt quite done, we ran out of Elmers glue and are waiting for our associate to return from a run to Wal-Mart. We are certain the duct tape will hold, but it is always good to build in redundent safety systems.
As you are probably wondering what the craft looks like, and we do have a vivid color photo of the wonderous creation, but all in good time. Our testing has confirmed that it does successfuly operate as it should with only one minor detail. When the brakes are released it instantly travels ot any point in time and/or space, but then for some reason, it returns just as quickly. Only by blinking our eyes at a specific rate do we notice any shift whatsoever, that how fast it can go.
Enough of the chit chat..below is our color photo of our liquid metal/plastic craft..
And no it wasnt done with adobe or altered in any way. It is just as the camera captured it.
Hopefully, no problems will arise later, since some of the cocktail napkins had accidently been soaked in some spilled spirits. This caused us to lose some of the required mathematical calculations due to the ink being diluted and becoming illegible.
Also we did lose one "page" when Steve thought he saw some governmemt agents and ate the napkin. Turned out the suspected government agents were Jehovahs Witnesses. We are not certain, but perhaps the Jehovahs Witnesses and The Men in Black are one and the Same. Think about it, riding our neighborhoods on bikes ( vehicles with no traceable heat sources / license plates, etc..), going door to door and attempting to gain entry into as many homes as possible. Hmmmmm...
Anyway, after carefuly putting together the components we realized our goal of building a temporal craft. It isnt quite done, we ran out of Elmers glue and are waiting for our associate to return from a run to Wal-Mart. We are certain the duct tape will hold, but it is always good to build in redundent safety systems.
As you are probably wondering what the craft looks like, and we do have a vivid color photo of the wonderous creation, but all in good time. Our testing has confirmed that it does successfuly operate as it should with only one minor detail. When the brakes are released it instantly travels ot any point in time and/or space, but then for some reason, it returns just as quickly. Only by blinking our eyes at a specific rate do we notice any shift whatsoever, that how fast it can go.
Enough of the chit chat..below is our color photo of our liquid metal/plastic craft..
And no it wasnt done with adobe or altered in any way. It is just as the camera captured it.
