let start over seriously this time around please

doctorz

doctorz

Chrono Cadet
All righty then , since the other thread went too off topic for my taste with the endless text that give me headaches , let start over with a new thread lets hope this one will remain , clean please, im trying to get everyone input here and do something with it , so here the deal , i dont have tons of cash to waste, im open to any new idea and any story of what you guys did so far , ive read most of the forum thread and found that many time over you guys were onto something serious but for some reason it went again off topic with tons of disagreement, this time around , here the deal , i want to build an experiment base on what i did before , if you have the skill read the story ,
timenomore the brossard experiment
make your own conclusion and please tell me what you think happen and why then we will try it again base on people guestimate and assumption , since no real model can be done at this time , when we all agree on a new theory base on what i did right and why this happen , i will go full on with a scale model withe the limited budget i have ,( im not here to gain any money , but there to share my experiment with you and see what we can accomplish together ,) thank you all and lets keep it short no text above 5 line after five line i get headach and losing attention to whats posted
image and picture help
thank you for collaborating
sincerly yours
Francois gagnon
your experimenter to be
 
may I suggest a Faraday Cage to your batteries pack...too. and a Caduceos Coil
caduceus.gif


and your Double Delta Antenna...

/ttiforum/images/graemlins/yum.gif
 
they are many form of cadeus coil winding , i did not use one of them , i use regualr configuration but the ick was that i run a dual set of wire along the same path and at the end i tie the two halve together hence in return running the current in both direction ive posted this all on the link above to my page , my old friend the professor say i creat a static field and from the current output of a 120vdc from the step up transformer with a minimal 20-30 amp
pulsing thru 14 magnet bar .
hope this help
cheers
Dr Z
 
The faraday cage for protection of your power cables when you materialize back to normal time-space
Does the cable materialized last time in the body of the car?

The Caduceos Coil for comunication link in a event you get problems in the other side...
Another set for the Ground Crew...
And the Double Delta Antenna for stability...

Regards...
 
The faraday cage for protection of your power cables when you materialize back to normal time-space
yes i have tought of this this time around because last time i had an electrician suit that protected me from high magnetic field wich i still own and plan to wear again , but yes ita good idea to line the inside of the car with aluminium foil to insulate from the outside source of signal (time frequency that could affect my body and temporal signature)


Does the cable materialized last time in the body of the car?
they were inside the body of the bar and protruding thru the body i keep the wire hidden from the outside to be inspicuous on the road it would have look even weird as it was, when i stop the car after the trial everything was very hot

The Caduceos Coil for comunication link in a event you get problems in the other side...
Another set for the Ground Crew...
i dont even a second tought about this because if it work i should be able to come back fine as i am

And the Double Delta Antenna for stability...the delat t antenna i use was to broadcast my mind human interface tot he frequency i use gibbs input on the PX plan to creat a inner singularity inside the car to stabilize it to be sure i would not be affected by whats going on outside

hope we will go somewere with this
cheers
Francois The faraday cage for protection of your power cables when you materialize back to normal time-space
 
doctorz

I have a couple of questions. You've stated that you are using 20 to 30 amps of current. Is this the amount of current measured before it is stepped up to 120 volts? Or is it the amount of current used at 120 volts?
 
there is such thing as a step transformator in the dc world i reach the dude who build me the power device and here its explanation,, ..dude your idea was too hard so i took a simple ondulator that took 12vdc to 120vac and built that pulsating device you wanted so in the bar you made there was a 120vac and it was pulsating thru your bar in the 2 wire not one at a time,, but there was 20-30 amp coming in the 12vdc but at the output i think its the same as any ondulator that you find at any local store he told me it was a 800watt so the max it could reach would be about that 20-30 amp
man if only they havent took everything , btw the dude is now 79 years .


i know you try something this week end but im sure you would have needed a set of wire roll together like i did not on transforamtor wire this alone doesnt do much ive try for the last couple of week i need more steel and wire to try again soon
cheers
 
doctorz

I had plans for putting together a test coil this last weekend. But I haven't completed it yet. It's close to completion though. It's just a small spiral coil wound with the parallel wire like in your coils. I plan on monitoring for any field emissions. I plan on using a variable AC voltage through the coil.
 
excellent work please keep us posted on your result
cheers
see you all this is what we need
i just wish cash will come my way so i can start my own soon
 
doctorz

I'm not familiar with the term ondulator. I was thinking that maybe you were referring to a power inverter. Check out this link and tell me if this is what you are talking about.

Power Inverter
 
yes power inverter ondulator is the french term ,sorry
keep me posted and please lets schedule another chat session it was quite interssting last time
cheers
Francois
 
Don,t create stray magnetic fields think about V.

When a magnetic field cuts thru a conductor it creates a current thus other magnetic fields that may be counter productive to your experiment. Channeling the magnetic field around such things and using non-conductive materials I believe will help. Also, we talked about John and I think it is the amount of voltage that helped him. But, if it gets too high it can jump out and get you so something akin to lighting rods to take it to ground if you use that much. If you do use anything to take it to ground keep it as close to source as possible.
 
How to build a stepup DC transformer.

there is such thing as a step transformator in the dc world i reach the dude who build me the power device and here its explanation,, ..dude your idea was too hard so i took a simple ondulator that took 12vdc to 120vac and built that pulsating device you wanted so in the bar you made there was a 120vac and it was pulsating thru your bar in the 2 wire not one at a time,, but there was 20-30 amp coming in the 12vdc but at the output i think its the same as any ondulator that you find at any local store he told me it was a 800watt so the max it could reach would be about that 20-30 amp
man if only they havent took everything , btw the dude is now 79 years .


i know you try something this week end but im sure you would have needed a set of wire roll together like i did not on transforamtor wire this alone doesnt do much ive try for the last couple of week i need more steel and wire to try again soon
cheers
Click to expand...

A step up transformer using DC voltage. The transformer will have to be pulsed. You can use a 555 timer chip and a relay. On the package it should have simple instructions for controlling the timing. The reason AC works because it goes back and forth so this is not needed. You can also run AC thru the transformer then convert it back to DC.
 
Building a power inverter

There is circuit called a bridge circuit. It has four diods. In a regular AC power supply it catches the AC and the diods prevent the current from flowing in the other direction. The AC current is converted to DC using the bridge, capacitors, and resisters. Anway there are sits on the net that give schematics and I come back later and post them if you want. So point is if you need to convert AC to DC or DC to AC its not that hard DC to AC just catch it and run it one way then the other.
 
Re: Building a power inverter

when rebuilding the new experiment we will try both power type to see wich one give the most acceleration and pulsation rate.
cheers guys let keep this up
we are onto something
dr z
 
Re: pic post

you quite the smart one arent you , the drawing illustrate very well , but it took me a few second to understand , what it meant by man made universe he meant the inner time singularity inside the car , were time goes as normal for the occupant , but outside the machine time move in the desire direction , in visual term it like riding along in a submarine , the people inside the submarine are stuck in the time line , but you want to take a shrot cut you go outside of time and move faster then them (time slipage theory) were you leave the time continuum and slip faster the the actual speed of time .
your not trying to create a black hole but a localize distortion surrounding a limited size object wich could be achieve but the biggest problem is to focus on the right frequency wich is very hard because earth time frequency only resonate thru us human not object so that is why we must have a human mind interface device that will help in setting the frequency (radionic device ) so we are a good couple of step away from this since we already have 45% of the equation already done ( the brossard experiment) so good work reactor im impress by your visualisation. cheers
DR Z
 
Back
Top